Oil cooler

Exploded View 1. Cylinder block 2. Water pipe 3. O-ring 4. O-ring 5. O-ring 6. Oil cooler 7. Connecting stud 8. O-ring 9. Oil filter bracket 10. Oil pressure switch 11. Oil filter ...

Engine Cooling System MR16DDT

...

Other materials:

P0097, P0098 IAT sensor 2
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

Diagnosis system (BCM) (with intelligent key system)
Common item : consult-III Function (BCM - common item) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the following for ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...