Preparation

Commercial Service Tools ...

Component parts

Component Parts Location 1. Door request switch (driver side) 2. Door mirror (driver side) 3. Remote keyless entry receiver Refer to DLK-21, "Component Parts Location" 4. Door mirr ...

Other materials:

Clutch pedal
Inspection and Adjustment INSPECTION The Height of Clutch Pedal 1. Turn the floor carpet. 2. Check that the clutch pedal height “H1” from the dash lower panel (1) is within the reference value. Clutch pedal height “H1” : Refer to CL-35, "Clutch Pedal". 3. Replace clutch pedal if t ...

P1574 ASCD vehicle speed sensor
Description The ECM receives two vehicle speed sensor signals via CAN communication line. One is sent from combination meter, and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to EC-64, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Sys ...

P0607 ECM
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC. Is DTC detected? YES >> Proceed to EC-685, "Diagnosis Procedure". NO >> INSPECTION END Diagnosis Procedure 1.INSPECTION START ...