Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, us ...

Component parts

Component Parts Location 1. BCM Refer to BCS-6, "BODY CONTROL SYSTEM : Component Parts Location" (with Intelligent Key) or BCS-96, "BODY CONTROL SYSTEM : Component Parts Locatio ...

Other materials:

P0715 input speed sensor A
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Be careful of the driving speed. 1.PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test. > ...

Engine maintenance (HR16DE)
Drive belt DRIVE BELT : Checking • Inspection should be done only when engine is cold or over 30 minutes after the engine is stopped. 1 : Alternator 2 : Water pump 3 : Crankshaft pulley 4 : A/C compressor 5 : Idler pulley 6 : Drive belt • Visually check belts for wear, damage, and cracks ...

Clutch pedal
Inspection and Adjustment INSPECTION The Height of Clutch Pedal 1. Turn the floor carpet. 2. Check that the clutch pedal height “H1” from the dash lower panel (1) is within the reference value. Clutch pedal height “H1” : Refer to CL-35, "Clutch Pedal". 3. Replace clutch pedal if t ...