Nissan Juke Service and Repair Manual : Radiator

Thermostat


    Periodical Maintenance Specification
    ENGINE COOLANT CAPACITY (APPROXIMATE) ...

    Other materials:

    P0717 input speed sensor A
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test. After the repair, p ...

    S mode switch
    Component Function Check 1.CHECK S MODE INDICATOR FUNCTION Check S mode indicator turns ON for approx. 2 seconds when ignition switch turns ON. Is the inspection results normal? YES >> GO TO 2. NO >> Go to TM-469, "Diagnosis Procedure". 2.CHECK S MODE SWITCH FUNCT ...

    Changing engine oil and filter
    Change the engine oil and filter according to the maintenance log shown in the NISSAN Service and Maintenance Guide. Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches the operating temperature. 3. Turn the engine off and wait ...