Nissan Juke Owners Manual : Outside air temperature

The outside air temperature is displayed in 8F or 8C.

When the outside air temperature becomes 378F (38C) or lower, the outside air temperature display blinks to give a warning. The display will stop blinking after 1 minute or when the outside air temperature becomes 398F (48C) or above.

The display may differ from the actual outside temperature displayed on various signs or billboards.

    Vehicle information display
    When the ignition switch is placed in the ON position, the vehicle information display shows the following information: 1. Outside air temperature 2. Continuously Variable Transmission (CVT) pos ...

    Continuously Variable Transmission (CVT) position indicator (if so equipped)
    The Continuously Variable Transmission (CVT) position indicator indicates the shift lever position when the ignition switch is in the ON position. ...

    Other materials:

    B2110 shift position/clutch interlock switch
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to PCS- 30, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Shift selector lever to the P position. 2. Turn ign ...

    P1614 chain of IMMU-KEY
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1 1. Contact Intelligent Key backside to push-button ignition switch. 2. Check DTC in “Self Diagnostic Result” mode of “ENGINE” using CONSULT-III. Is DTC detected? YES >> Go to SEC-55, &quo ...

    Additional service when replacing ECM
    Description When replacing ECM, this procedure must be performed. Work Procedure 1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS Refer to SEC-50, "ECM : Work Procedure". >> GO TO 2. 2.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNIN ...