Nissan Juke Service and Repair Manual : Wiring diagram

IPDM E/R

Wiring Diagram

For connector terminal arrangements, harness layouts, and alphabets in a described in wiring diagram), refer to GI-12, "Connector Information/Explanation(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation".



DTC/circuit diagnosis


    ECU diagnosis information
    IPDM E/R Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES *1: MR16DDT engine models *2: Except MR16DDT engine models *3: CVT models *4: M/T models *5 ...

    Other materials:

    Shift position indicator circuit
    Description • TCM sends position indicator signals to combination meter by CAN communication line. • Manual mode switch position is indicated on shift position indicator Component Function Check 1.CHECK SHIFT POSITION INDICATOR CAUTION: Always drive vehicle at a safe speed. 1. Start engine. ...

    Back door opener actuator
    Component Function Check 1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “TRUNK/BACK DOOR” in “ACTIVE TEST” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Back door o ...

    B26FC key registration
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Perform initialization of BCM and reregistration of all Intelligent Keys using CONSULT-III. For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NV ...