Nissan Juke Service and Repair Manual : System description

Preparation
Commercial Service Tools ...

Component parts
Component Parts Location 1. Combination meter 2. Key switch 3. BCM Refer to BCS-96, "BODY CONTROL SYSTEM : Component Parts Location" 4. Power window main switch (door lock/unlock ...

Other materials:

Combination switch output circuit
Diagnosis Procedure 1.CHECK OUTPUT 1 - 5 CIRCUIT FOR OPEN 1. Turn ignition switch OFF. 2. Disconnect BCM and combination switch connectors. 3. Check continuity between BCM harness connector and combination switch harness connector. Does continuity exist? YES >> GO TO 2. NO >> ...

Engine oil
Inspection OIL LEVEL AND MUDDINESS • Before starting the engine, check the oil level placing vehicle horizontally. If the engine is already started, stop it and allow 10 minutes before checking. • Make sure the oil level is within the range shown in the figure. • If it is out of range, adj ...

Liquid Gasket
REMOVAL OF LIQUID GASKET SEALING • After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100 (J-37228)] (A) and remove old liquid gasket sealing. CAUTION: Be careful not to damage the mating surfaces. • Tap the seal cutter [SST: KV10111100 (J- ...