Nissan Juke Service and Repair Manual : System description

Preparation
Commercial Service Tools ...

Component parts
Component Parts Location 1. Combination meter 2. Intelligent Key warning buzzer 3. Push-button ignition switch 4. Inside key antenna (instrument center) 5. TCM Refer to TM-133, "CVT CO ...

Other materials:

B2268 water temp
Description The engine coolant temperature signal is transmitted from ECM to the combination meter via CAN communication. DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS OF ECM Perform “Self Diagnosis Result” of “ENGINE”, and repair or replace malfunctioning pa ...

Engine does not start or starts with difficulty
Description CHART 2: ENGINE DOES NOT START OR STARTS WITH DIFFICULTY Diagnosis Procedure 1.CHECK FUEL Check that the fuel reservoir is correctly filled and with the right fuel. >> GO TO 2. 2.CHECK BATTERY Check the battery. Refer to PG-124, "Removal and Installation". I ...

System
System Description SYSTEM DIAGRAM • The multi display unit transmits the operation status of the drive mode switch to other units via CAN communication as the mode signal (refer below). - NORMAL: ON/OFF - SPORT: ON/OFF - ECO: ON/OFF • Based on the mode signals received from TCM (CVT mod ...