Drive Belt

Belt Deflection *: When engine is cold. Belt Tension and Frequency *: When engine is cold. ...

Exhaust Manifold

EXHAUST MANIFOLD ...

Other materials:

Speed limiter main switch
Component Function Check 1.CHECK SPEED LIMITER MAIN SWITCH FUNCTION 1. Turn ignition switch ON. 2. Check the voltage between ECM harness connector terminals under the following conditions Is the inspection result normal? YES >> INSPECTION END NO >> Go to EC-1020, "Diagnosi ...

Security indicator lamp does not turn on or blink
Description Security indicator lamp does not blink when ignition switch is in a position other than ON. NOTE: • Before performing the diagnosis, check “Work Flow”. Refer to SEC-187, "Work Flow". • Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERAT ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...