Nissan Juke Owners Manual : Manual air conditioner (if so equipped)
1. Air intake lever (Outside air circulation
/Air recirculation
)
2. Air flow control 
dial
3. Fan speed control dial
4. A/C (Air Conditioner) button
5. Temperature control dial
6. Rear window defroster 
button (See
“Rear window and outside mirror defroster switch” .)
To turn off the heater and air conditioner, turn the fan speed control
dial to the OFF (0) position.
Controls
Outside air circulation:
Move the air intake lever to the
position. The air flow is drawn from outside the vehicle.
Air recirculation:
Move the air intake lever to the
position. The air flow is circulated inside the vehicle.
Air flow control:
Turn the air flow control dial to change the air flow mode.
— Air flows from the center and
side ventilators.
— Air flows from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and
foot outlets.
— Air flows mainly from the defroster
outlets.
• When the or
position is selected, the air conditioner
will automatically turn on.
This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed or the fan control dial is turned to off.
Fan speed control:
Turn the fan speed control 
dial
clockwise to increase the fan speed.
Turn the fan speed control 
dial
counterclockwise to decrease the fan speed.
A/C (Air Conditioner) operation:
Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates.
Temperature control:
Turn the temperature control dial to set the desired temperature. Turn the dial between the middle and the right position to select the hot temperature. Turn the dial between the middle and the left position to select the cool temperature.
Heater operation
Heating
:
This mode is used to direct heated air to the foot outlets.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
Ventilation
:
This mode directs outside air to the side and center ventilators.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets to defrost/defog the windows.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
• To remove frost from the outside surface of the windshield quickly, turn the
temperature control dial to the maximum hot position and the fan speed control
dial to the maximum position.
• When the 
position is selected, the
air conditioner will automatically turn on. This will dehumidify the air and help
to defog the windows. The A/C indicator light will illuminate when the air conditioner
automatically turns on. The air conditioner and A/C indicator light will remain
on in all flow control modes until the A/C button is pushed or the fan control dial
is turned to off.
Bi-level heating:
This mode directs cool air from the side and center vents and warm air from the foot outlets.
When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Turn the temperature control dial to the desired position.
Heating and defogging:
This mode heats the interior and defogs the windows.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Turn the temperature control dial to the desired position.
When the 
position is selected, the
air conditioner will automatically turn on. This will dehumidify the air and help
to defog the windows. The A/C indicator light will illuminate when the air conditioner
automatically turns on.
The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed or the fan control dial is turned to off.
Air conditioner operation
The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication.
Cooling
:
This mode is used to cool and dehumidify the air.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position.
• For quick cooling when the outside temperature is high, move the air
intake lever to the 
position. Be sure
to move the air intake lever to the
position for normal cooling.
• A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
Dehumidified heating:
This mode is used to heat and dehumidify the air.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
Dehumidified defogging:
This mode is used to defog the windows and dehumidify the air.
1. Move the air intake lever to the
position.
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial
to the desired position.
4. Turn the temperature control dial to the desired position.
When the 
position is selected, the
air conditioner will automatically turn on. This will dehumidify the air and help
to defog the windows. The A/C indicator light will illuminate when the air conditioner
automatically turns on.
The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed or the fan control dial is turned to off.
Heater and air conditioner
WARNING
• The air conditioner cooling function operates only when the engine
is running.
• Do not leave children or adults who would normally require the support of others
alone in your ve ...
Automatic air conditioner (with Integrated Control System)
1. AUTO button/Temperature control dial
2. OFF button
3. A/C button
4. CLIMATE button
5. Display screen
6. Air flow control buttons
7. Fan speed control dial
8. Front defroster button
9. Ai ...
Other materials:
Back door opener system
System Diagram
System Description
BACK DOOR OPENER OPERATION
When back door opener switch is pressed, BCM operates back door opener
actuator.
NOTE:
Back door opener actuator is not for locking the back door. The function is only
to open the back door.
OPERATION CONDITION
If the foll ...
Oil pan (lower)
Exploded View
With Oil Cooler
1. Rear oil seal
2. O-ring
3. Oil pan (upper)
4. Oil pump chain tensioner (for oil
pump drive chain)
5. Oil pump drive chain
6. Crankshaft sprocket
7. Oil pump sprocket
8. Oil pump
9. O-ring
10. O-ring
11. Oil pan (lower)
12. Oil pan drain plug
...
Indicator lights
All-Wheel Drive (AWD) indicator
light (AWD model)
When the ignition switch is in the “ON” position, the All-Wheel Drive (AWD) indicator
light illuminates and then turns off.
When selecting AWD mode while the engine is running, the AWD indicator light
illuminates.
(See “All-Wheel Drive (AWD ...