Door cable

Exploded View LEFT SIDE 1. Heater unit assembly 2. Intake door lever 3. Intake door link 4. Intake door cable 5. Air mix door cable 6. Air mix door link 7. Air mix door rod 8. Lower ai ...

Precaution

...

Other materials:

Rear wiper auto stop signal circuit
Component Function Check 1.CHECK REAR WIPER (AUTO STOP) OPERATION CONSULT-III DATA MONITOR 1. Select “WIPER” of BCM data monitor item. 2. Operate the rear wiper. 3. Check that “RR WIPER STOP” changes to “On” and “Off” linked with the wiper operation. Is the status of item normal? YES > ...

P0603 ECM power supply
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

Ignition signal
Component Function Check 1.INSPECTION START Turn ignition switch OFF, and restart engine. Does the engine start? YES-1 >> With CONSULT-III: GO TO 2. YES-2 >> Without CONSULT-III: GO TO 3. NO >> Go to EC-783, "Diagnosis Procedure". 2.IGNITION SIGNAL FUNCTION ...