Vehicle recovery (freeing a stuck vehicle)

WARNING • Stand clear of a stuck vehicle. •  Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat an ...

Cleaning exterior

In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surfaces, wash your vehicle as soon as you can: • after a rainfall to prevent p ...

Other materials:

Refilling
1. Remove filler plug (1) and gasket. Then fill oil up to mounting hole for the filler plug. : Vehicle front Oil and viscosity : Refer to MA-13, "Fluids and Lubricants". Oil capacity : Refer to DLN-117, "General Specifications". CAUTION: Carefully fill the oil. (Fill up ...

Liquid Gasket
REMOVAL OF LIQUID GASKET SEALING • After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100] (A) and remove old liquid gasket sealing. CAUTION: Be careful not to damage the mating surfaces. • Tap the seal cutter [SST: KV10111100] to insert it ...

Cooling fan
Diagnosis Procedure 1.CHECK GROUND CONNECTION 1. Turn ignition switch OFF. 2. Check ground connection E38. Refer to Ground Inspection in GI-44, "Circuit Inspection". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace ground connection. 2.CHE ...